Solara Coupe L4-2.4L (2AZ-FE) (2007)
d. Disengage the clamp and remove the screw.
e. Disengage the 2 pins and remove the steering pad switch assembly.
INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY
a. Engage the 2 pins and install the steering pad switch assembly.
b. Install the screw and engage the clamp.
Torque: 2.4 N.m (24 kgf.cm, 21 in.lbf)
c. Engage the 2 pins and install the steering pad switch assembly.
d. Install the screw and engage the clamp.
Torque: 2.4 N.m (24 kgf.cm, 21 in.lbf)
e. Connect the connector to the spiral cable.
2. INSTALL STEERING PAD
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER
5. CONNECT BATTERY NEGATIVE TERMINAL
6. PERFORM INITIALIZATION
7. INSPECT STEERING PAD
8. INSPECT SRS WARNING LIGHT