Solara Coupe L4-2.4L (2AZ-FE) (2007)
/Page-764007.png)
If it becomes hard to move the shift lever, perform again (See procedure "A").
REASSEMBLY
1. INSTALL INDICATOR LIGHT WIRE SUBASSEMBLY
(a)
Connect the 2 terminals of the indicator light wire harness to the transmission control switch connector.
(b) Install the position indicator light bulb to the indicator light wire.
(c)
Connect the connector to the transmission floor shift assembly.
2. INSTALL POSITION INDICATOR HOUSING ASSEMBLY
(a)
Install the position indicator housing to the transmission floor shift assembly.
HINT: Securely engage the claws.
