Solara Coupe V6-3.3L (3MZ-FE) (2008)
Steering Mounted Controls Assembly: Service and Repair
Installation
METER: STEERING PAD SWITCH:
INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY (See: Radio, Stereo, and Compact Disc/Radio/Stereo/Remote Switch/Service and
Repair/Installation)
2. INSTALL STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization).
7. INSPECT SRS WARNING LIGHT
(See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System)