Solara Coupe V6-3.3L (3MZ-FE) (2008)
MIL is not illuminated.
OK -- REPLACE ECM
NG -- CHECK AND REPAIR HARNESS AND CONNECTOR
3. CHECK THAT MIL IS ILLUMINATED
(a) Check that the MIL is illuminated when turning the ignition switch to the ON position.
Standard:
MIL is illuminated.
OK -- SYSTEM OK
NG -- Continue to next step.
4. INSPECT COMBINATION METER (MIL CIRCUIT)
(a) See the combination meter troubleshooting (See: Testing and Inspection/Symptom Related Diagnostic Procedures/Meter / Gauge
System/Problem Symptoms Table).
NG -- REPAIR OR REPLACE BULB OR COMBINATION METER
OK -- CHECK AND REPLACE HARNESS AND CONNECTOR (COMBINATION METER - ECM)