Solara Coupe V6-3.3L (3MZ-FE) (2008)
/Page-709006.png)
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE (ECM MAIN BUS WIRE)
OK -- REPLACE ECM
7. CHECK FOR SHORT IN CAN BUS WIRES (NO. 2 CAN J/C - NO. 1 CAN J/C)
(a) Reconnect the CAN main bus wire connector (J22) to the No. 1 CAN J/C "A" side (with earth terminal).
(b) Disconnect the No. 2 CAN J/C connector (J18).
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (NO. 1 CAN J/C - NO. 2 CAN J/C)
OK -- Continue to next step.
8. CHECK FOR SHORT IN CAN BUS WIRES (SKID CONTROL ECU BRANCH WIRE)
(a) Measure the resistance according to the value(s) in the table below.
(b) Measure the resistance according to the value(s) in the table below.
