Solara Coupe V6-3.3L (3MZ-FE) (2008)
3. SKID CONTROL ECU
(a) Check the skid control ECU.
(1) Turn the ignition switch off.
(2) Disconnect the connector (S1) from the skid control ECU.
(3) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) Check the skid control ECU harness side connector (S1).
(1) Turn the ignition switch off.
(2) Disconnect the connector (S1) from the skid control ECU.
(3) Measure the resistance according to the value(s) in the table below.
Standard resistance:
4. STEERING SENSOR