Solara Coupe V6-3.3L (3MZ-FE) (2008)
(a) Install the upper quarter trim panel LH.
4. INSTALL UPPER QUARTER TRIM PANEL LH (for Convertible)
5. INSTALL NO. 1 CUP HOLDER (for Convertible)
6. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (for Coupe)
7. INSTALL CENTER PILLAR GARNISH LH (for Coupe)
8. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (for Coupe)
9. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Coupe)
10. INSTALL REAR SEATBACK ASSEMBLY (for Coupe)
11. INSTALL REAR SEATBACK ASSEMBLY (for Convertible)
HINT: Refer to the procedures up to "INSTALL REAR SEATBACK ASSEMBLY" (See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly/Installation).
12. INSTALL REAR SEAT CUSHION ASSEMBLY (for Coupe) (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly/Installation)
13. INSTALL FRONT DOOR SCUFF PLATE LH (for Coupe)
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
(a) When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization).
15. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Test Mode Procedure).