Front Suspension Lower No 1 Arm - Service and Repair
(b) Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No. 1 LH.
Torque: 200 Nm (2,040 kgf-cm, 148 ft-lbf)
(c) Install the bolt and nut on the rear side of the front suspension arm sub-assembly lower No. 1 LH.
Torque: 206 Nm (2,100 kgf-cm, 152 ft-lbf)
2. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (AUTOMATIC TRANSAXLE)
(a) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
3. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (MANUAL TRANSAXLE)
(a) Install the bracket to the manual transmission with the 4 bolts.
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
(b) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (2AZ-FE ENGINE TYPE)
HINT: (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation)
5. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (3MZ-FE ENGINE TYPE)
HINT: (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation)