Supra L6-183 2997cc 3.0L DOHC (2JZ-GE) (1993)
Transmission Temperature Sensor/Switch: Service and Repair
A/T FLUID TEMP. SENSOR REPLACEMENT
1. DISCONNECT A/T FLUID TEMP. SENSOR CONNECTOR
2. REMOVE A/T FLUID TEMP. SENSOR
-
Remove the A/T fluid temp. sensor.
-
Remove the 0-ring.
3. INSTALL A/T FLUID TEMP. SENSOR
-
Coat a new 0-ring with A/T fluid and install it to the A/T fluid temp. sensor.
-
Install the A/T fluid temp. sensor.
Torque: 15 Nm (150 kgf.cm, 11 ft.lb)
4. CONNECT A/T FLUID TEMP. SENSOR CONNECTOR.