Supra L6-2997cc 3.0L DOHC MFI (1998)
11. REMOVE TIMING BELT FROM CAMSHAFT TIMING PULLEYS
(Re-using timing belt): Place matchmarks on the timing belt and camshaft timing pulleys as shown in the illustration.
a. Alternately loosen the 2 bolts, and remove them, the tensioner and dust boot.
b. Disconnect the timing belt from the camshaft timing pulleys.
12. REMOVE EXHAUST CAMSHAFT TIMING PULLEY
Using SST, remove the bolt and timing pulley.
SST 09960 - 10010 (09962 - 01000, 09963 - 01000)
13. REMOVE THROTTLE BODY AND INTAKE AIR CONNECTOR ASSEMBLY
14. REMOVE NO.1 CYLINDER HEAD COVER
a. Using a 5 mm hexagon wrench, remove the bolts, and disconnect the engine wire protector from the No.2 cylinder head cover.
b. Remove the nut, and disconnect the engine wire protector from the intake manifold.
c. Remove the 2 bolts, and disconnect the high-tension cords with the clamp from the No.2 cylinder head.
d. Remove the 6 bolts, 2 nuts, No.1 cylinder head cover and gasket.