Supra L6-2997cc 3.0L DOHC MFI (1998)
11. ADJUST VALVE CLEARANCE
a. Remove the adjusting shim.
-
Turn the camshaft so that the cam lobe for the valve to be adjusted faces up.
-
Turn the valve lifter with a screwdriver so that the notches are perpendicular to the camshaft.
-
Insert Special Service Tool (SST) (B) gently from the inside as shown in the illustration.
-
Using SST (A), hold the camshaft as shown in the illustration.
SST 09248 - 55040 (09248 - 5410)
-
Using SST (A), press down the valve lifter and place SST (B) between the camshaft and valve lifter. Remove SST (A).
SST 09248 - 55040 (09248 - 05410, 09248 - 05420)
HINT:
-
Apply SST (B) at slight angle on the side marked with "7" or "9", at the position shown in the illustration.