toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Evaporative Emission Control Canister|Testing and Inspection|Page 3648 > < VSV for EVAP <--> [Canister Purge Solenoid]|Locations|Page 3644
Page 1
background image

Evaporative Emission Control Canister: Testing and Inspection

INSPECTION

1. VISUALLY INSPECT CHARCOAL CANISTER

Look for cracks or damage.

2. CHECK FOR CLOGGED FILTER, AND STUCK CHECK VALVE AND DIAPHRAGM

(a) While holding port B closed, blow air (1.76 kPa (18 gf/Sq. cm, 0.26 psi)) into port A and check that air flows from port D.

(b) While holding port B and port D closed, blow air (1.76 kPa (18 gf/Sq. cm, 0.26 psi)) into port A and check that air does not flow from port C.

(c) Apply vacuum (3.43 kPa (26 mmHg, 1.01 in.Hg)) to port B, check that the vacuum does not decrease when port C is closed, and check that the

vacuum decreases when a port C is released.

Evaporative Emission Control Canister|Testing and Inspection|Page 3648 > < VSV for EVAP <--> [Canister Purge Solenoid]|Locations|Page 3644