Supra L6-2997cc 3.0L DOHC MFI (1998)
(c) Calculate the No.2 joint angle.
No.2 joint angle:
A-B = -1°09'±36'
A: Intermediate shaft installation angle
B: Propeller shaft installation angle
(d) Calculate the No.3 joint angle.
No.3 joint angle:
B-C = 44'±36'
B: Propeller shaft installation angle
C: Differential installation angle
If the measured angle is not within the specification, adjust it with the center support bearing adjusting washer and differential adjusting shim.
NOTICE:
-
Left and right washers should be the same thickness.
-
2 washers should not be assembled together. Some vehicles are not assembled with washers.
NOTICE: