Supra L6-2997cc 3.0L DOHC MFI (1998)
(a) Using SST, loosen the adjusting nut until it can be turned by hand. SST 09922-10010
HINT: Use 2 of the same type SST.
(b) Place matchmarks on the differential companion flange and flexible coupling.
(c) Remove the 3 bolts inserted in the differential companion flange.
NOTICE: The bolts inserted in the propeller shaft companion flange should not be removed.
(d) Separate the flexible coupling from the differential side.
HINT: If the flexible coupling cannot be easily separated by hand, insert a screwdriver into the bolt hole of the flexible coupling, as shown in
the illustration, then pry the coupling out.
NOTICE: Do not bring the screwdriver blade In direct contact with the flexible coupling's rubber portion.
(e) Place matchmarks on the transmission companion flange and propeller shaft flange.
(f) Remove the 4 washers and nuts.