Supra L6-2997cc 3.0L DOHC MFI (1998)
Flex Plate: Testing and Inspection
DRIVE PLATE INSPECTION
1. MEASURE DRIVE PLATE RUNOUT AND INSPECT RING GEAR
a. Set up a dial indicator and measure the drive plate runout.
b. Check the damage of the ring gear.
Maximum runout: 0.20 mm (0.0079 inch)
If the runout is not within the specification or ring gear is damaged, replace the drive plate.
Torque: 83 Nm (850 kgf-cm 61 ft. lbs.)