Supra L6-30L DOHC (7M-GE) (1990) Front Planetary Gear Service and Repair
Planetary Gears: Service and Repair
Front Planetary Gear
COMPONENTS
INSPECTION OF FRONT PLANETARY GEAR
1. CHECK FRONT PLANETARY RING GEAR BUSHING
Using a dial indicator, measure the inside diameter of the planetary ring gear bushing.
Maximum inside diameter: 24.08 mm (0.9480 in.)
If the inside diameter is greater than the maximum, replace the planetary ring gear.
2. MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.20-0.60 mm (0.0079 - 0.0236 in.)
Maximum clearance: 1.00 mm (0.0394 in.)