Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
Camshaft Position Sensor: Service and Repair
COMPONENTS
REMOVAL OF CAM POSITION SENSOR
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY
2. DISCONNECT CAM POSITION SENSOR CONNECTOR
3. SET NO.1 CYLINDER TO TDC COMPRESSION
(a) Remove the oil filler cap.
(b) Look through oil filler hole and turn the crankshaft clockwise until the cam nose can be seen.
(c) Turn the crankshaft counterclockwise approximately 120°.