toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Water Pump|Specifications|Page 2480 > < Water Pump|Specifications|Page 2478
Page 2
background image

(a) Remove the two nuts, and disconnect the No.2 water bypass pipe from the water pump.
(b) Disconnect the No.3 turbo water hose from the water pump.

(c) Remove the six bolts, water pump and gasket.
(d) Remove the drain hose.
(e) Remove the O-ring from the cylinder block.

INSTALLATION

1. Install water pump as follows:

(a) Install a new O-ring to the cylinder block.
(b) Install the drain hose.

Water Pump|Specifications|Page 2480 > < Water Pump|Specifications|Page 2478