Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(a) Using a press, slowly press in the push rod using 981-9,807 N (100-1,000 kg, 220-2,205 lbs.) of force.
(b) Align the holes of the push rod and housing, pass a 1.5 mm hexagon wrench through the holes to keep the push rod retracted.
(c) Release the press.
(d) Install the dust boot onto the tensioner.
12. Install timing belt tensioner as follows:
(a) Install the tensioner with the two bolts hand tight.
(b) Alternately tighten the two bolts to 26 Nm (270 kg. cm., 20 ft. lbs.).
(c) Remove the 1.5 mm hexagon wrench from the tensioner.
13. Check camshaft timing as follows:
(a) Slowly turn the crankshaft pulley two revolutions from TDC to TDC.
NOTE: Always turn the crankshaft clockwise.
