Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
Drive Belt: Testing and Inspection
A/C
1. INSPECT DRIVE BELT'S INSTALLATION CONDITION
Check that the drive belt fits properly in the ribbed grooves.
2. INSPECT DRIVE BELT TENSION
Check that the tension is within A range on the auto tensioner scale.
If the tension is not within the A range on the scale, replace the belt with a new one.
HINT: When replacing the drive belt with a new one, the belt tension should be within the B range on the belt tensioner scale.