Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
2. Using SST, tighten the nuts to the specified torque.
SST 09810-38140
Torque: 17 N.m (173 kgf.cm, 13 ft.lbf)
NOTE: If the nut is over tightened, it may cause cracks on the inside of the insulator.
h. Clean the contact surfaces of the remaining contact plate and plunger with a dry shop rag.
i.
Reinstall the plunger, new gasket, end cover and lead clamp with the 3 bolts.
Torque: 2.5 N.m (26 kgf.cm, 22 in.lbf)
REASSEMBLY
Reassembly is in the reverse order of disassembly.
HINT: Use high-temperature grease to lubricate the bearings and gears when assembling the starter.