Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
Seals and Gaskets: Service and Repair
EXTENSION HOUSING OIL SEAL
ON-VEHICLE REPAIR
1. REMOVE PROPELLER SHAFT
2. REMOVE REAR OIL SEAL
NOTICE: Clean the extension housing before removing the oil seal.
Using SST remove the oil seal.
SST 09308-10010
3. INSTALL NEW OIL SEAL
a. Using Special Service Tool (SST) and a hammer, carefully drive the oil seal in as far as it will go.
SST 09325-40010
b. Coat the lip of a new oil seal with MP grease.
4. INSTALL PROPELLER SHAFT
5. FILL ATF AND CHECK FLUID LEVEL