T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
Brake Drum: Service and Repair
Rear Brake Components (4WD)
REMOVAL
1. Remove rear wheel.
2. Remove brake drum.
NOTE: If the brake drum cannot be removed easily, do the following steps.
(a) Remove the adjusting hole plug in the backing plate.
Inspect Shoe Lining Thickness
(b) Insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjusting bolt.
(c) Using another screwdriver, reduce the brake shoe adjustment by turning the adjusting bolt.
INSTALLATION
1. Install the drum.