T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
Vacuum Brake Booster: Service and Repair
REMOVAL
1. Remove master cylinder. See: Hydraulic System/Brake Master Cylinder/Service and Repair
2. Disconnect vacuum hose from brake booster.
3. Remove pedal return spring.
4. Remove clip and clevis pin.
5. Remove brake booster.
(a) Remove the 4 installation nuts and clevis.
(b) Pull out the brake booster and gasket.
INSTALLATION
1. Install brake booster.
(a) Install the booster and a new gasket.
(b) Install the clevis to the operating rod.
Install Brake Booster
(c) Install and torque the booster installation nuts.
Torque:13 Nm (9 ft. lbs.)
(d) Install the clevis pin into the clevis and brake pedal, and install the clip to the clevis pin.
(e) Install the pedal return spring.