T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-240001.png)
Front Crankshaft Seal: Service and Repair
1.
Remove crankshaft pulley as outlined under Oil Pump.
2.
Using a suitable tool pry out seal, using care not to damage crankshaft or seal housing.
3.
Lubricate lips of new seal, then using seal driver tool No. 09223-50010, or equivalent, drive new seal into place.
4.
Reverse procedure to install.