T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-443001.png)
Engine Control Module: Service and Repair
NOTE: Installation is in the reverse order of removal.
1. DISCONNECT BATTERY.
2. REMOVE FRONT DOOR SCUFF PLATE.
Remove the 4 screws and front scuff plate.
3. REMOVE COWL SIDE TRIM.
Remove the clip and cowl side trim.
4. REMOVE ECM.
-
Disconnect the 4 ECM connectors.
-
Remove the 3 bolts and ECM.