T100 Pickup 2WD L4-2.7L (3RZ-FE) (1994)
Fig. 6 Exploded View Of PD60 & PD66 Disc Brake Assembly.
1. Raise and support vehicle and remove tire and wheel assembly.
2. Remove caliper attaching bolts, Figs. 5 and 6, and the caliper, supporting caliper out of way so that brake hose is not stretched.
3. Remove two anti-rattle springs, brake pads, anti-squeal shims and the four support plates.
4. Reverse procedure to install, torquing caliper mounting bolts to 29 ft. lbs.