T100 Pickup 2WD L4-2.7L (3RZ-FE) (1994)
Brake Caliper: Service and Repair
Removal and Installation
1.
Raise and support vehicle and remove tire and wheel assembly.
2.
Disconnect brake line at caliper.
3.
Remove bracket from caliper.
4.
Remove two caliper attaching bolts and the caliper.
5.
Remove anti-rattle springs, brake pads, anti-squeal shims and support plates.
6.
Reverse procedure to install. Torque bracket attaching bolts to 13 ft. lbs. and the brake line to 11 ft. lbs.