T100 Pickup 2WD L4-2.7L (3RZ-FE) (1994)
Shift Interlock: Testing and Inspection
ON-VEHICLE INSPECTION
Check Shift Lock System
a. With depressing the brake pedal, check that the tip of the parking lock cable protrudes from the pedal bracket.
b. Set the shift position to the P position. With the brake pedal depressed, check the select lock cancel.
c. Check that the lock pin has no unusual operation sound.
d. Remove the center cluster finish lower panel.
Check that the sliding rod is protruded when the ignition key plate is turned from LOCK position to ACC position.
1) Check that the sliding rod is released when the ignition key plate is turned to LOCK position.
If the key interlock solenoid operation is defective, replace the key cylinder