toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3406 > < Diagram Information and Instructions|Page 3404
Page 7
background image

1-Ground: Approx. 12 Volts 0.2 Seconds with following operation.

^ Door lock control SW Unlocked
^ Door lock control SW Locked with Ignition key in Cylinder and Driver's Door open (Ignition Key Reminder Function)
^ Door lock knob Locked with Ignition key in cylinder and Driver's Door open. (Ignition Key Reminder Function)
^ Unlocking the Driver's RH Door cylinder with key.

6-Ground: Approx. 12 Volts 0.2 Seconds with following operation.

^ Door Lock control SW Locked
^ Locking the Driver's RH Door cylinder with key

4-Ground: 0 Volts with Door Lock control SW Locked or Driver's, RH Door Lock cylinder Locked with key
7-Ground: Continuity with RH Door open.
9-Ground: Continuity with Driver's Door Lock knob Unlocked

12-Ground: Continuity with RH Door Lock knob Unlocked.
13-Ground: Approx. 12 Volts with Ignition key in cylinder.

3-Ground: 0 Volts with Door Lock control SW Unlocked

D14, D15 DOOR COURTESY SW

1-Ground: Closed with Door open.

D18, D19 DOOR KEY LOCK AND UNLOCK SW, DOOR LOCK MOTOR AND DOOR UNLOCK DETECTION SW

3-7(LH), 2-6(RH): Closed with Door Lock cylinder Unlocked with key
5-6(LH), 7-8(RH): Closed with Door Lock cylinder Locked with key
4-8(LH), 1-5(RH): Closed with Unlock position

I14 UNLOCK WARNING SW [IGNITION SW]

4-5:

Closed with Ignition key in cylinder

Connector Joining Wire Harness and Wire Harness

Connector Joining Wire Harness And Wire Harness

Location Of Connector Joining Wire Harness And Wire Harness, Ground Points

Diagram Information and Instructions|Page 3406 > < Diagram Information and Instructions|Page 3404