T100 Pickup 2WD V6-3.4L (5VZ-FE) (1996)
6. INSPECT ECT SENSOR.
-
Using an ohmmeter, measure the resistance between the terminals.
Resistance: Refer to the graph above.
-
If the resistance is not as specified, replace the ECT sensor.
7. REINSTALL ECT SENSOR.
-
Install a new gasket to the ECT sensor.
-
Using a 19 mm deep socket, install the ECT sensor.
Torque: 20 Nm (14 ft lb)
-
Connect the ECT sensor connector.
8. REINSTALL FUEL PIPE.
-
Install the fuel pipe with 4 new gaskets and the 2 union bolts.
Torque: 34.3 Nm (25 ft lb)
9. REINSTALL NO.2 TIMING BELT COVER.
Torque: 9 Nm (80 in lb)
10. RECONNECT UPPER RADIATOR HOSE TO WATER OUTLET.
11. REFILL WITH ENGINE COOLANT.