T100 Pickup 2WD V6-3.4L (5VZ-FE) (1996)
/Page-296001.png)
Catalytic Converter: Service and Repair
REPLACE CENTER EXHAUST PIPE
-
2WD: Disconnect the 2 rings from the support bracket.
-
Remove the 2 nuts and gasket. and disconnect the heated oxygen sensor (bank 1 sensor 2).
Torque: 20 Nm (14 ft lb)
INSTALLATION HINT: Use a new gasket.
-
Remove the 4 bolts, TWC joint retainer, center exhaust pipe and 2 gasket.
Torque: 48 Nm (35 ft lb)
INSTALLATION HINT: Place 2 new gaskets on the front exhaust and tail pipes, and temporarily install the center exhaust pipe.