T100 Pickup 2WD V6-3.4L (5VZ-FE) (1996)
Engine Control Module: Service and Repair
COMPONENTS FOR REMOVAL AND INSTALLATION
ECM REMOVAL
INSTALLATION HINT: Installation is in the reverse order of removal.
1. REMOVE FRONT DOOR SCUFF PLATE.
-
Remove the 4 screws and front scuff plate.
2. REMOVE COWL SIDE TRIM.
-
Remove the clip and cowl side trim.
3. REMOVE ECM.
-
Disconnect the ECM connectors.
-
Remove the 3 bolts and ECM.