T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-314008.png)
43. Install the gaskets to the No.2 idler pulley, fan bracket, and No.2 timing belt cover.
44. Install the timing belt cover with the eleven mount bolts.
45. Using suitable nuts, install the two stud bolts as shown.
46. Connect the four clamps on the spark plug cables to the mount bolts of the timing cover.
47. Using a razor blade and gasket scraper, carefully remove any old packing material from the gasket surfaces and sealing groove. Thoroughly clean
all components to remove all loose material. Use a non-residue solvent to clean both sealing surfaces.
48. Apply seal packing (part No. 08826-00100) to the sealing groove of the water outlet as shown above.
