T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-203004.png)
16. Install the knock pin to the LH camshaft.
17. Align the knock pin hole of the camshaft with the knock pin groove of the cam pulley.
18. Slide the cam pulley on the camshaft, facing the flange side outward as shown.
19. Using SST # 09278-54012, install the pulley bolt and torque to 108 Nm (80 ft.lbs).
20. Turn the crankshaft pulley and align it's mark with the timing mark "0" of the No.1 timing belt cover.
21. Turn the RH camshaft and align the knock pin hole with the timing mark of the No.3 timing belt cover.
22. Turn the LH cam pulley, align the timing marks of the cam pulley and No.3 timing belt cover.
