T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-2001.png)
Electronic Brake Control Module: Testing and Inspection
Standard Values of ECU Terminals
1. Remove glove box or ECU cover, as required, and pull out ABS computer.
2. Using a multimeter with high impedance (10,000 ohms minimum), measure voltage and resistance at each terminal shown in Figs. 173 through
197, and body ground.
3. Ensure results are as shown.
Fig. 173 Anti-Lock Brake System Circuit Test (W/Computer Connector Connected).
