T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-1230001.png)
Steering Gear: Service and Repair
Removal and Installation
1.
Remove joint protector set bolt, then mark relative position between universal joint and worm shaft.
2.
Remove two universal joint attaching bolts, then disconnect universal joint from worm shaft.
3.
Remove pitman arm set nut, then disconnect pitman arm from steering gear housing, using tool No. 09628-62011 or equivalent.
4.
Remove gear housing attaching bolts, then the gear housing.