T100 Pickup 4WD V6-3.4L (5VZ-FE) (1995)
4. Disconnect PS pump from engine.
(a) Disconnect the 2 PS air hoses from the air intake chamber and resonator.
(b) Remove the bolt holding the PS pressure tube clamp to the frame.
(c) Remove the drive belt.
(d) Remove the bolt and nut, and disconnect the PS pump from the engine.
5. On vehicles with A/C, disconnect A/C compressor from engine.
(a) Disconnect the A/C compressor connector.
(b) Remove the drive belt.
(c) Remove the 4 bolts, and disconnect the A/C compressor from the engine.
6. Loosen fan with fluid coupling and fan pulleys.
7. Remove the drive belt for generator.
8. Remove No.2 fan shroud.
9. Remove fan with fluid coupling and fan pulleys.
10. On vehicles with A/C, remove A/C compressor bracket.
Remove the 5 bolts and A/C compressor bracket.
11. Remove oil dipstick and guide.
Remove the bolt, oil dipstick, guide and 0-ring.