T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
![background image](/toyota/t100_regular_cab_pickup_2wd/l4-2693cc_2.7l_dohc_mfi/Page-1641007.png)
Voltage Check
(a) Establish conditions in which voltage is present at the check point.
Example:
A- Ignition SW ON
B- Ignition SW and SW 1 ON
C - Ignition SW, SW 1 and Relay on (SW 2 OFF)
(b) Using a voltmeter, connect the negative lead to a good ground point or negative battery terminal, and the positive lead to the connector or
component terminal. This check can be done with a test light instead of a voltmeter.