T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
M/T: Install the 2 supports with the 4 bolts.
Torque: 13 Nm (9 ft. lbs.)
A/T: Install the 2 supports with the 8 bolts.
Torque: 5.5 Nm (49 inch lbs.)
2. INSTALL RADIATOR
a. Insert the tabs of the radiator support through the radiator service holes.
b. Install the radiator with the 4 bolts.
Torque: 31 Nm (23 ft. lbs.)
3. CONNECT RADIATOR OUTLET HOSE
4. INSTALL WATER PUMP PULLEY, FAN SHROUD, FAN WITH FLUID COUPLING AND DRIVE BELT
5. w/ A/C: INSTALL A/C COMPRESSOR DRIVE BELT
Install and adjust the A/C compressor drive belt.
6. INSTALL POWER STEERING PUMP DRIVE BELT
Install and adjust the power steering pump drive belt.
7. CONNECT RADIATOR RESERVOIR HOSE
8. CONNECT RADIATOR INLET HOSE
9. INSTALL RADIATOR GRILLE
a. Install the 4 screws, 11 clips and radiator grille.
b. Install the 4 screws and clearance lights.
10. FILL WITH ENGINE COOLANT
11. START ENGINE AND CHECK FOR LEAKS