T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
b. Align the timing mark of the crankshaft timing gear with the mark link of the No.1 timing chain and install the No.1 timing chain.
c. Tie the No.1 timing chain with a cord as shown in the illustration and make sure it doesn't come loose.
7. INSTALL TIMING CHAIN COVER
a. Install 3 new gaskets to the cylinder block and No.1 water bypass pipe.
b. Install the timing chain cover with the 9 bolts and 2 nuts.
Torque:
Bolt A: 20 Nm (14 ft. lbs.)
Bolt B: 24.5 Nm (18 ft. lbs.)
Bolt C: 44 Nm (32 ft. lbs.)
Nut D: 20 Nm (14 ft. lbs.)
c. Remove the cord from the chain.
d. Install the 2 timing chain cover mounting bolts.
Torque: 18 Nm (13 ft. lbs.)
e. Install the 2 No.1 water bypass pipe mounting nuts.
Torque: 20 Nm (14 ft. lbs.)