T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
Expansion Valve: Testing and Inspection
1. CHECK QUANTITY OF GAS DURING REFRIGERATION CYCLE
2. SET ON MANIFOLD GAUGE SET
3. RUN ENGINE
a. Run the engine at 1 ,500 rpm for at least 5 minutes.
b. Then check that the high pressure reading is 1.37- 1.57 MPa (14 - 16 kgf/Sq. cm, 199 - 228 psi).
4. CHECK EXPANSION VALVE
If the expansion valve is faulty, the low pressure reading will drop to 0 kPa (0 kgf/Sq. cm, 0 psi).
HINT: When the low pressure drops to 0 kPa (0 kgf/Sq. cm, 0 psi), check the receiver's IN and OUT sides for no temperature difference.