T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
13. 5VZ-FE: INSTALL SENSOR ROTOR
Install the lock ball and sensor rotor.
14. INSTALL SPEEDOMETER DRIVE GEAR AND BALL
a. Install the speedometer drive gear and ball.
b. Using a snap ring expander, install the snap ring.
15. INSTALL EXTENSION HOUSING AND GASKET
a. Apply sealant or equivalent to the 6 bolts.
Sealant: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Install the extension housing with a new gasket to the case.
c. Install the 6 bolts.
Torque: 36 Nm (370 kgf-cm, 27 ft. lbs.)
HINT: The 2 lower bolts are shorter.
16. INSTALL REAR MOUNTING INSULATOR TO EXTENSION HOUSING
Install the engine rear mounting insulator with the 4 bolts.
Torque: 65 Nm (660 kgf-cm, 48 ft. lbs.)