T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
Ignition Coil: Testing and Inspection
INSPECTION
INSPECT IGNITION COIL
(a) Disconnect the high-tension cords from the ignition coil.
(b) Disconnect the ignition coil connectors.
(c) Using an ohmmeter, measure the secondary coil resistance between the positive (+) and high-tension terminals.
Secondary coil resistance:
Cold: 9.7 - 16.7 K ohms
Hot: 12.4 - 19.6 K ohms
If the resistance is not as specified, replace the ignition coil.
(d) Connect ignition coil connectors.
(e) Connect the high-tension cords from the ignition coils.