T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
Vehicle Speed Sensor: Service and Repair
Speed Sensor Rotor Replacement
ON-VEHICLE REPAIR
1. REMOVE PROPELLER SHAFT
2. DISCONNECT SPEEDOMETER CABLE AND REMOVE SPEEDOMETER DRIVEN GEAR
3. REMOVE NO.2 VEHICLE SPEED SENSOR
4. JACK UP TRANSMISSION SLIGHTLY
Securely support the transmission on a transmission jack. Lift the transmission slightly from the crossmember.
5. 3RZ-FE: REMOVE REAR MOUNTING BRACKET FROM REAR SUPPORT MEMBER
Remove the 7 bolts from the rear mounting bracket.
6. 5VZ-FE: REMOVE REAR MOUNTING BRACKET FROM REAR SUPPORT MEMBER
Remove the 8 bolts from the rear mounting bracket.
7. REMOVE REAR MOUNTING INSULATOR FROM EXTENSION HOUSING
Remove the 4 bolts and the engine rear mounting insulator from the extension housing.
8. REMOVE EXTENSION HOUSING AND GASKET
Remove the 6 bolts. If necessary, tap the extension housing with a plastic hammer or a block of wood to loosen it.