T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
-
Make sure that the length of the left and right rack ends is the same.
d. Tighten the tie rod end lock nut.
Torque: 56 Nm (41 ft. lbs.).
e. Place the boot on the seat and clip it.
HINT: Insure that the boots are not twisted.
7. INSPECT THE WHEEL ANGLE
Turn the steering wheel fully, and measure the turning angle.
If the wheel angle differ from the standard specifications, check to see if the lengths of the left and right tie rods are the same.
HINT:
-
If the tie rods lengths are not equal, the wheel angle can not be adjusted properly.
-
Reinspect the toe-in after adjusting the tie rods lengths.