T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
a. Using SST 09236-00101 (09237-00010), 09612-65014 (09612-01060) or equivalents, remove the oil seal from the rack bushing.
NOTICE:
-
As shown, from the opposite side of SST confirm that its claw is firmly caught on the bushing.
-
Be careful not to damage the bushing.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST 09950-60010 (09951-00260, 09951-00410, 09952-06010) or equivalents, press in the oil seal to the rack bushing.
NOTICE: Make sure to install the oil seal facing the correct direction.
5. If necessary, replace teflon ring and O-ring.
a. Using a screwdriver, remove the teflon ring and O-ring from the steering rack.
NOTICE: Be careful not to damage the groove of the ring.
b. Coat a new O-ring with power steering fluid and install it.
c. Expand a new teflon ring with your fingers.
NOTICE: Be careful not to overexpand the ring.