T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
![background image](/toyota/t100_regular_cab_pickup_2wd/l4-2693cc_2.7l_dohc_mfi/Page-1056001.png)
Torque Converter: Technical Service Bulletins
A/T - Torque Converter Bolt Installation Precautions
T-SB-0014-11
February 17, 2011
Torque Converter Bolt Installation
Service Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
Introduction
The purpose of this TSB is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle
assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in
this bulletin when installing an automatic transmission/transaxle assembly.
NOTE
Not all applications will use washers on the torque converter bolts.
Warranty Information
Installation Procedure
^
When removing torque converter bolts and washers take special care that the same bolts and washers are used when installing the torque converter.
^
Using an incorrect size bolt or washer may cause damage to the torque converter assembly.