T100 Regular Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
Type "B" Brake Pad
A.
Remove the clip, pins and anti-rattle spring/pad retainer clip.
B.
Remove the brake pads with the anti-squeal shims.
C.
Clean any dust from the brake pads.
D.
Apply a small amount of the disc brake caliper grease (1-2 mm thick) to the areas indicated in the illustration.
NOTE:
Do NOT apply grease to the friction surfaces of the brake pads or the disc rotor.
E.
Install the brake pads with the anti-squeal shims.
NOTE:
Clean excess grease from the brake pads and caliper.
F.
Install the pad guide pin, clip and anti-squeal spring.
G.
Install the wheel assembly.