T100 Regular Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
![background image](/toyota/t100_regular_cab_pickup_2wd/v6-3.4l_(5vz-fe)/Page-225007.png)
Voltage Check
a. Establish conditions in which voltage is present at the check point.
Example:
A- Ignition SW ON
B- Ignition SW and SW ON
C- Ignition SW, SW 1 and Relay on (SW 2 OFF)
b. Using a voltmeter, connect the negative lead to a good ground point or negative battery terminal, and the positive lead to the connector or
component terminal. This check can be done with a test a light instead of a voltmeter.